Fiber/Metal Composite Technology for Future Primary Aircraft StructuresALDERLIESTEN, R. C; BENEDICTUS, R.Journal of aircraft. 2008, Vol 45, Num 4, pp 1182-1189, issn 0021-8669, 8 p.Conference Paper

The tensile and fatigue properties of carbon fiber-reinforced PEEK-titanium fiber-metal laminatesCORTES, P; CANTWELL, W. J.Journal of reinforced plastics and composites. 2004, Vol 23, Num 15, pp 1615-1623, issn 0731-6844, 9 p.Article

Impact resistance of fiber-metal laminates: A reviewSADIGHI, M; ALDERLIESTEN, R. C; BENEDICTUS, R et al.International journal of impact engineering. 2012, Vol 49, pp 77-90, issn 0734-743X, 14 p.Article

The response of polymeric composite structures to air-blast loading: a state-of-the-artLANGDON, G. S; CANTWELL, W. J; GUAN, Z. W et al.International materials reviews. 2014, Vol 59, Num 3, pp 159-177, issn 0950-6608, 19 p.Article

Abrasive water jet machining of glass fibre metal laminatesPAUL, S; HOOGSTRATE, A. M; VAN PRAAG, R et al.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2002, Vol 216, Num 11, pp 1459-1469, issn 0954-4054, 11 p.Article

Linear Damage Accumulation for Predicting Fatigue in Fiber Metal LaminatesKHAN, S. U; ALDERLIESTEN, R. C; BENEDICTUS, R et al.Journal of aircraft. 2009, Vol 46, Num 5, pp 1706-1713, issn 0021-8669, 8 p.Article

Dynamic response of fiber-metal laminates (FMLs) subjected to low-velocity impactPAYEGANEH, G. H; ASHENAI GHASEMI, F; MALEKZADEH, K et al.Thin-walled structures. 2010, Vol 48, Num 1, pp 62-70, issn 0263-8231, 9 p.Article

Investigation of high velocity impact of cylindrical projectile on sandwich panels with fiber-metal laminates skins and polyurethane coreGHALAMI-CHOOBAR, Mehran; SADIGHI, Mojtaba.Aerospace science and technology (Imprimé). 2014, Vol 32, pp 142-152, issn 1270-9638, 11 p.Article

Analytical modeling to predict the low velocity impact response of circular GLARE fiber-metal laminatesTSAMASPHYROS, George J; BIKAKIS, George S.Aerospace science and technology (Imprimé). 2013, Vol 29, Num 1, pp 28-36, issn 1270-9638, 9 p.Article

Thermal postbuckling analysis of fiber―metal laminated plates including interfacial damageYIMING FU; JUN ZHONG; YANG CHEN et al.Composites. Part B, Engineering. 2014, Vol 56, pp 358-364, issn 1359-8368, 7 p.Article

Impact response of fiber metal laminate sandwich composite structure with polypropylene honeycomb coreTAN, C. Y; AKIL, Hazizan Md.Composites. Part B, Engineering. 2012, Vol 43, Num 3, pp 1433-1438, issn 1359-8368, 6 p.Article

Applicability of AZ31B-H24 magnesium in Fibre Metal Laminates ― An experimental impact researchPÄRNÄNEN, T; ALDERLIESTEN, R; RANS, C et al.Composites. Part A, Applied science and manufacturing. 2012, Vol 43, Num 9, pp 1578-1586, issn 1359-835X, 9 p.Article

Crack-Tip Behavior in Fiber/Metal Laminates by Means of Digital-Image CorrelationRODI, R; ALDERLIESTEN, R. C; BENEDICTUS, R et al.Journal of aircraft. 2010, Vol 47, Num 5, pp 1636-1646, issn 0021-8669, 11 p.Article

Interaction of hybrid pressurised cylindrical structures subjected to blast loadingMOHAMED, G; SOUTIS, C; HODZIC, A et al.Plastics, rubber and composites. 2012, Vol 41, Num 2, pp 69-76, issn 1465-8011, 8 p.Conference Paper

Numerical Simulation of Glass-Fiber-Reinforced Aluminum Laminates with Diverse Impact DamageSEO, Hyoungseock; HUNDLEY, Jake; HAHN, H. T et al.AIAA journal. 2010, Vol 48, Num 3, pp 676-687, issn 0001-1452, 12 p.Article

Fracture micromechanisms of fibre-metal laminates: In-situ SEM observationsCASTRODEZA, E. M; BASTIAN, F. L; YAWNY, A et al.Journal of composite materials. 2002, Vol 36, Num 4, pp 387-400, issn 0021-9983Article

Stacking sequence design of fiber-metal laminate for maximum strengthNAM, H. W; HWANG, W; HAN, K. S et al.Journal of composite materials. 2001, Vol 35, Num 18, pp 1654-1683, issn 0021-9983Article

Predicting the influence of temperature on fatigue crack propagation in Fibre Metal LaminatesRANS, C. D; ALDERLIESTEN, R. C; BENEDICTUS, R et al.Engineering fracture mechanics. 2011, Vol 78, Num 10, pp 2193-2201, issn 0013-7944, 9 p.Article

Bearing Strength Analysis of Hybrid Titanium Composite LaminatesHUNDLEY, Jacob M; YANG, Jenn-Ming; HAHN, H. Thomas et al.AIAA journal. 2008, Vol 46, Num 8, pp 2074-2085, issn 0001-1452, 12 p.Article

Low-velocity impact response characterization of a hybrid titanium composite laminateBERNHARDT, S; RAMULU, M; KOBAYASHI, A. S et al.Journal of engineering materials and technology. 2007, Vol 129, Num 2, pp 220-226, issn 0094-4289, 7 p.Article

Study on the drilling of titanium/graphite hybrid compositesKIM, D; RAMULU, M.Journal of engineering materials and technology. 2007, Vol 129, Num 3, pp 390-396, issn 0094-4289, 7 p.Article

Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loadsKHALILI, S. M. R; DAGHIGH, V; ESLAMI FARSANI, R et al.Journal of reinforced plastics and composites. 2011, Vol 30, Num 8, pp 647-659, issn 0731-6844, 13 p.Article

The low-velocity impact response of fiber-metal laminatesFAN, J; CANTWELL, W. J; GUAN, Z. W et al.Journal of reinforced plastics and composites. 2011, Vol 30, Num 1, pp 26-35, issn 0731-6844, 10 p.Article

Fracture toughness of unidirectional fiber-metal laminates : crack orientation effectCASTRODEZA, E. M; BASTIAN, F. L; PEREZ IPINA, J. E et al.Engineering fracture mechanics. 2005, Vol 72, Num 14, pp 2268-2279, issn 0013-7944, 12 p.Article

Cured shape and snap-through of bistable twisting hybrid [0/90/metal]_T laminatesFUHONG DAI; HAO LI; SHANYI DU et al.Composites science and technology. 2013, Vol 86, pp 76-81, issn 0266-3538, 6 p.Article